Plate mounted axial fans with IEC motor

ventilateurs d'extraction industriels

SERIE LUX-PLATE-M

PLATE MOUNTED AXIAL FANS WITH IEC MOTOR

 LUX-PLATE-M line is designed for installations requiring large capacities with low pressures, in applications for wall or panel fixing.

For instance: ventilation of commercial and industrial buildings, car parks, stock farms, cooling of electric and refrigerating equipments, etc.

RANGE
This line consists of 10 sizes with impeller diameter from 250 up to 800 mm.

ADVANTAGES PLATE-M line is characterized by versatility and competitive prices, consequence of accurate design and material choices: impeller is composed of a sturdy hub in die-cast aluminum alloy and blades moulded in different materials suitable for heavy-duty applications. Motor is manufactured according to IEC standards, guarantying reliability and a long term economic recovery of the fan by replacing or repairing the motor itself.

CONSTRUCTION

  • Supporting frame with wide shaped inlet in corrosion proof material or protected against the atmospheric agents.
  • Motors support and safety grid, in steel rod manufactured in accordance with UNI EN ISO 12499.
  • Impeller with high efficiency airfoil blades in plastic material and hub in die cast aluminum alloy. Variable pitch angle in still position. Balancing according to UNI ISO 1940.
  • Asynchronous electric motor three or single phase, protection IP 55, class F insulated, service S1, form B5, construction according to IEC / EEC (UNEL-MEC) standards.
  • Arrangement 5 (impeller directly coupled to motor shaft).
TECHNICAL SPECIFICATIONS
LUX-PLATE-M standard
  • Conveyed air: clean, not abrasive.
  • Temperature of conveyed air: -20°C/+50°C.
  • Voltage: three phase version (T) 400V-3Ph. Single phase version (M) 230V-1Ph.
  • Frequency: 50Hz.
  • Air flow from motor to impeller, position A (FMG).
ACCESSORIES
  • Gravity shutter (SG)
  • Impeller side protection grid (PG-P)
  • (Necessary for use in free air)
  • Speed regulators (SR)
  • Spacer (SP)
  • Service switch (SW)
ON REQUEST
  • Versions without motor side grid.
  • Versions with die-cast aluminum blades.
  • Versions with air flow from impeller to motor: position B (FGM).
  • Explosion proof versions (PLATE- Atex).


Certifications

Performances

Performance shown in the selection diagrams refer to air at 15°C temperature and 0 mt a.s.l. altitude, and they were obtained in installation type “B” with no grid nor accessories. Tolerances : perfomance and sound power levels within the tolerances allowed by the DIN 24166 standard for Class 2.

1 mm H2O = 9,8 Pa

Plate mounted axial fans with IEC motor

Graphiques

La photo montre les performances des ventilateurs dans les différents diamètres. 

Plate mounted axial fans with IEC motor

Dimensions


Plate mounted axial fans with IEC motor

Accessories


Plate mounted axial fans with IEC motor